PDC4S:\A\AGI - 1911 3 Pack\AGI 308 and 309 - Building the Ultimate 1911 (2 of 4)

Up one directory...
NameSizeDate Modified
01 - Title.avi1,690 KB8/28/2012 5:59 PM
02 - Introduction.avi21,514 KB8/28/2012 5:47 PM
03 - Fitting the Slide to the Frame.avi113,682 KB8/28/2012 9:33 PM
04 - Positioning the Slide.avi57,454 KB8/28/2012 10:05 PM
05 - Barrel Types and Fitting.avi210,524 KB8/28/2012 6:51 PM
06 - Lock-Up.avi21,490 KB8/28/2012 5:50 PM
07 - Cutting the Lugs.avi51,480 KB8/28/2012 8:11 PM
08 - Fitting the Link.avi106,648 KB8/28/2012 9:49 PM
09 - Reaming the Barrel.avi53,842 KB8/28/2012 10:24 PM
10 - Ramping and Polishing the Barrel.avi32,242 KB8/28/2012 5:45 PM
11 - Installing a Full Length Guide Rod.avi37,888 KB8/28/2012 8:55 PM
12 - Pencil Test and Hang Test.avi24,706 KB8/28/2012 5:45 PM
13 - Installing the Firing Pin & Stop.avi31,774 KB8/28/2012 5:41 PM
14 - Tuning the Extractor.avi82,350 KB8/28/2012 5:19 AM
15 - Installing the Ejector.avi51,602 KB8/28/2012 10:38 PM
16 - Installing the Plunger Tube.avi32,776 KB8/28/2012 5:31 PM
17 - Installing the Grip Safety.avi29,698 KB8/28/2012 6:35 AM
18 - Installing the Trigger.avi62,460 KB8/28/2012 4:57 PM
19 - Fitting the Safety.avi39,938 KB8/28/2012 8:40 PM
20 - The Trigger Job.avi14,344 KB8/28/2012 5:59 AM
21 - The Trigger Job (Trigger Fixtures).avi7,180 KB8/28/2012 5:58 PM
22 - The Trigger Job (Sear-Trigger Relationship).avi24,400 KB8/28/2012 5:43 PM
23 - The Trigger Job (Continued).avi211,164 KB8/28/2012 6:31 PM
24 - Lubrication.avi28,680 KB8/28/2012 7:05 AM
25 - Fitting the Safeties.avi60,416 KB8/28/2012 5:19 PM
26 - Installing the Stock Screw Bushings.avi60,416 KB8/28/2012 5:23 PM
27 - Final Contouring.avi34,828 KB8/28/2012 7:19 PM
28 - Installing the Sights.avi89,084 KB8/28/2012 10:01 PM
29 - Final Thoughts.avi11,208 KB8/28/2012 5:56 PM
30 - Manufacturer's Information.avi22,456 KB8/28/2012 5:47 PM